Cisco router traditional bogons

This page aggregates all of the examples referenced on the Bogon Route Server Project (Bogons via BGP) page. Please see that page for full details of the Bogon Route Server Project, system requirements, caveats, etc.

router bgp <your asn>
  neighbor x.x.x.x remote-as 65333
  neighbor x.x.x.x ebgp-multihop 255
  neighbor x.x.x.x description <your description>
  neighbor x.x.x.x prefix-list cymru-out out
  neighbor x.x.x.x route-map CYMRUBOGONS in
  neighbor x.x.x.x password <your password>
  neighbor x.x.x.x maximum-prefix 100 threshold 90
! You'll need to increase the maximum to at least 50000 with an
! appropriate thresholds if you're receiving one or both fullbogons
! feeds.
!
! Depending on IOS version, you may need to configure your router
! for new-style community syntax.
ip bgp-community new-format
!
! Set a bogon next-hop on all routers that receive the bogons.
ip route 192.0.2.1 255.255.255.255 null0
!
! Configure a community list to accept the bogon prefixes into the
! route-map.
ip community-list 10 permit 65333:888
!
! Configure the route-map.  Remember to apply it to the proper
! peering sessions.
route-map CYMRUBOGONS permit 10
  description Filter bogons learned from cymru.com bogon route-servers
  match community 10
  set ip next-hop 192.0.2.1
!
ip prefix-list cymru-out seq 5 deny 0.0.0.0/0 le 32

Cisco peer-groups traditional bogons

With the advent of multiple bogon route-servers, the use of BGP peer-groups on Cisco routers is very convenient. Thanks to John Brown for the original example.

router bgp <your asn>
  neighbor cymru-bogon peer-group
  neighbor cymru-bogon ebgp-multihop 255
  neighbor cymru-bogon description <general description>
  neighbor cymru-bogon prefix-list cymru-out out
  neighbor cymru-bogon route-map CYMRUBOGONS in
  neighbor cymru-bogon maximum-prefix 100 threshold 90
! You'll need to increase the maximum to at least 50000 with an
! appropriate thresholds if you're receiving one or both fullbogons
! feeds.
!
  neighbor x.x.x.x remote-as 65333
  neighbor x.x.x.x peer-group cymru-bogon
  neighbor x.x.x.x description <specific description>
  neighbor x.x.x.x password <your password>

Juniper router traditional bogons

routing-options {
    static {
        route 192.0.2.1/32 {
            discard;
            no-readvertise;
            retain;
        }
    }

    /* If you have declared 192.0.2.0/24 as a bogon add this entry. */
    martians {
     192.0.2.1/32 exact allow;
    }

    autonomous-system <your AS here>;
}

protocols {
    bgp {
        group CYMRU {
            type external;
            description "peering to receive bogons from CYMRU";
            import CYMRU-bogons-in;
            authentication-key "secretkey"; # SECRET-DATA
            export deny-all;
            peer-as 65333;
            /* Below may also be expressed as "multihop 255;" depending on your version */
            multihop {
                ttl 255;
            }
            neighbor <bogon rs IP>;
            local-address <your IP we are peering with>;
            family inet {
                unicast {
                    /* You'll need to increase the prefix limit below to
                       at least 50000 if you're receiving one or both of 
                       the fullbogons feeds
                    */
                    prefix-limit {
                        maximum 100;
                        teardown 100;
                    }
                }   
            }
        }
    }
}

policy-options {
    policy-statement CYMRU-bogons-in {
        term 1 {
            from {
                protocol bgp;
                as-path CYMRU-private-asn;
                community CYMRU-bogon-community;
            }
            then {
      /* backup in case no-export is cleared internally */
                community add dont-announce;
                next-hop 192.0.2.1;
                accept;
            }
        }
        then reject;    #  default action
    }

    policy-statement deny-all {
        then reject;
    }

    community dont-announce members <your as here>:<some community that supresses anouncements outside your as>; 

    community CYMRU-bogon-community members [ no-export 65333:888 ];

    as-path CYMRU-private-asn 65333;
}

Force10 router traditional bogons

router bgp <your asn>
  neighbor IPV4_BOGONS peer-group
  neighbor IPV4_BOGONS route-map CYMRUBOGONS in
  neighbor IPV4_BOGONS distribute-list CYMRU-OUT out
  neighbor IPV4_BOGONS maximum-prefix 100 90
  neighbor IPV4_BOGONS soft-reconfiguration inbound
  neighbor IPV4_BOGONS no shutdown
  neighbor x.x.x.x remote-as 65333
  neighbor x.x.x.x peer-group IPV4_BOGONS
  neighbor x.x.x.x description <your description>
  neighbor x.x.x.x ebgp-multihop 255
  neighbor x.x.x.x password <your password>
  neighbor x.x.x.x no shutdown
! Set a bogon next-hop on all routers that receive the bogons.
ip route 192.0.2.1 255.255.255.255 null0
!
! Configure a community list to accept the bogon prefixes into the
! route-map.
ip community-list CYMRU_COMMUNITY
 permit 65333:888
!
! Configure the route-map.  Remember to apply it to the proper
! peering sessions.
route-map CYMRU_BOGONS permit 10
  description Filter bogons learned from cymru.com bogon route-servers
  match community CYMRU_COMMUNITY
  set next-hop 192.0.2.1
!
ip prefix-list CYMRU_OUT
  seq 5 deny any

OpenBSD bgpd traditional bogons

OpenBSD's bgpd project can also be used to peer with the bogon route-servers. Our thanks to Pete Vickers for this example.

# config snippet for /etc/bgpd.conf
#
# Based on config by Pete Vickers 05/2004.
#
# Modified slightly to intermingle with pf, and
#   also to apply policy to cymru-sourced routes
#   received from IBGP peers.
#
# Configure sessions with cymru reprobates
#
group "peering bogon" {
  remote-as 65333
  local-address <MY-ROUTER-IP>
  multihop 64
  announce none
  max-prefix 1000
  # You'll need to increase the max-prefix number above to at least
  # 50000 if you're receiving either or both of the fullbogons feeds
  tcp md5sig password <PASSWORD>
  neighbor <BOGON-ROUTE-SERVER-1-IP>
  neighbor <BOGON-ROUTE-SERVER-2-IP>
  # ... etc
}
#
#
# What to do with updates (can be used with updates from
# cymru peers, and also from IBGP peers if other routers
# in this AS also take a bogon feed). The "nexthop
# blackhole" is a little extraneous given the pf config,
# worth keeping in case the packet filter is disabled
# at any point.
#
allow from any community 65333:888 set pftable "bogons"
allow from any community 65333:888 set nexthop blackhole


# config snippet for /etc/pf.conf
#
table <bogons> persist
#
# no bogon sources or destinations
block quick from <bogons> to any
block quick from any to <bogons>

Mikrotik RouterOS traditional bogons

This example of how to configure a Mikrotik RouterOS box to use the Bogon Route Server Project is thanks to Ariel S. Weher.

# Config by Ariel S. Weher, based on Team Cymru's Cisco Template.
# Working in the 3.X version of Mikrotik RouterOS.
# 2009-02-06 Modified by Sam Norris, Fine Tuned.  Removed static routes
#              and used "set-type=blackhole". 

/routing bgp instance
set default as=<YOUR_ASN_NUMBER> router-id=<Your router wan ip address>

/ip firewall address-list
add address=<SESSION#1.Team-Cymru's.IP.Address> comment="TEAM-CYMRU BOGON Server #1" \
    disabled=no list=BGP-NEIGHBORS
add address=<SESSION#2.Team-Cymru's.IP.Address> comment="TEAM-CYMRU BOGON Server #2" \
    disabled=no list=BGP-NEIGHBORS

/ip firewall filter
add action=accept chain=input comment="BGP Neighbors" disabled=no dst-port=179 \
    protocol=tcp src-address-list=BGP-NEIGHBORS

# You'll need to increase the max-prefix-limit values in the lines below to
# at least 50000 if you're receiving either or both of the fullbogons feeds
/routing bgp peer
add comment="TEAM-CYMRU BOGON Server #1" hold-time=3m in-filter=BOGON-SERVER-IN \
    instance=default max-prefix-limit=50 multihop=yes name=CYMRU-1 nexthop-choice=default \
    out-filter=BGP-DROP remote-address=<SESSION#1.Team-Cymru's.IP.Address> \
    remote-as=65333 route-reflect=no tcp-md5-key=<Password_Received_From_Cymru> ttl=255

add comment="TEAM-CYMRU BOGON Server #2" hold-time=3m in-filter=BOGON-SERVER-IN \
    instance=default max-prefix-limit=50 multihop=yes name=CYMRU-1 nexthop-choice=default \
    out-filter=BGP-DROP remote-address=<SESSION#2.Team-Cymru's.IP.Address> \
    remote-as=65333 route-reflect=no tcp-md5-key=<Password_Received_From_Cymru> ttl=255

/routing filter
add action=accept bgp-communities=65333:888 chain=BOGON-SERVER-IN comment="" \
    disabled=no invert-match=no set-type=blackhole
add action=discard chain=BOGON-SERVER-IN comment="" disabled=no invert-match=no
add action=discard chain=BGP-DROP comment="" disabled=no invert-match=no 

Cisco fullbogons IPv4 and IPv6 (IPv4 transport)

router bgp <your asn>
 ! Session 1
 neighbor A.B.C.D remote-as 65332
 neighbor A.B.C.D description <your description>
 neighbor A.B.C.D ebgp-multihop 255
 neighbor A.B.C.D password <your password>
 ! Session 2
 neighbor E.F.G.H remote-as 65332
 neighbor E.F.G.H description <your description>
 neighbor E.F.G.H ebgp-multihop 255
 neighbor E.F.G.H password <your password>
!
 address-family ipv4
  ! Session 1
  neighbor A.B.C.D activate
  neighbor A.B.C.D soft-reconfiguration inbound
  neighbor A.B.C.D prefix-list cymru-out-v4 out
  neighbor A.B.C.D route-map CYMRUBOGONS-V4 in
  ! Session 2
  neighbor E.F.G.H activate
  neighbor E.F.G.H soft-reconfiguration inbound
  neighbor E.F.G.H prefix-list cymru-out-v4 out
  neighbor E.F.G.H route-map CYMRUBOGONS-V4 in
!
 address-family ipv6
  ! Session 1
  neighbor A.B.C.D activate
  neighbor A.B.C.D soft-reconfiguration inbound
  neighbor A.B.C.D prefix-list cymru-out-v6 out
  neighbor A.B.C.D route-map CYMRUBOGONS-V6 in
  ! Session 2
  neighbor E.F.G.H activate
  neighbor E.F.G.H soft-reconfiguration inbound
  neighbor E.F.G.H prefix-list cymru-out-v6 out
  neighbor E.F.G.H route-map CYMRUBOGONS-V6 in
!
! Depending on IOS version, you may need to configure your router
! for new-style community syntax.
ip bgp-community new-format
!
ip community-list 100 permit 65332:888
!
ip route 192.0.2.1 255.255.255.255 Null0
!
ip prefix-list cymru-out-v4 seq 5 deny 0.0.0.0/0 le 32
!
ipv6 route 2001:DB8:0:DEAD:BEEF::1/128 Null0
!
ipv6 prefix-list cymru-out-v6 seq 5 deny ::/0 le 128
!
route-map CYMRUBOGONS-V6 permit 10
description IPv6 Filter bogons learned from cymru.com bogon route-servers
match community 100
set ipv6 next-hop 2001:DB8:0:DEAD:BEEF::1
!
route-map CYMRUBOGONS-V4 permit 10
description IPv4 Filter bogons learned from cymru.com bogon route-servers
match community 100
set ip next-hop 192.0.2.1

Note: You can receive both IPv4 and IPv6 fullbogons over IPv4 transport. If you only requested one set of fullbogons, simply remove all references to the other set from the example above.


Cisco fullbogons IPv4 and IPv6 (IPv6 transport)

Thanks to Thomas Brandstetter for this example of configuring a Cisco router to receive the IPv4 and IPv6 fullbogons over IPv6 transit.

router bgp <your asn>
 neighbor XXXX:XXX:XXXX::XXXX:XXXX remote-as 65332
 neighbor XXXX:XXX:XXXX::XXXX:XXXX description <your description>
 neighbor XXXX:XXX:XXXX::XXXX:XXXX ebgp-multihop 255
 neighbor XXXX:XXX:XXXX::XXXX:XXXX password <your password>
!
 address-family ipv4
  neighbor XXXX:XXX:XXXX::XXXX:XXXX activate
  neighbor XXXX:XXX:XXXX::XXXX:XXXX soft-reconfiguration inbound
  neighbor XXXX:XXX:XXXX::XXXX:XXXX prefix-list cymru-out-v4 out
  neighbor XXXX:XXX:XXXX::XXXX:XXXX route-map CYMRUBOGONS-V4 in
!
 address-family ipv6
  neighbor XXXX:XXX:XXXX::XXXX:XXXX activate
  neighbor XXXX:XXX:XXXX::XXXX:XXXX soft-reconfiguration inbound
  neighbor XXXX:XXX:XXXX::XXXX:XXXX prefix-list cymru-out-v6 out
  neighbor XXXX:XXX:XXXX::XXXX:XXXX route-map CYMRUBOGONS-V6 in
!
! Depending on IOS version, you may need to configure your router
! for new-style community syntax.
ip bgp-community new-format
!
ip community-list 100 permit 65332:888
!
ip route 192.0.2.1 255.255.255.255 Null0
!
ip prefix-list cymru-out-v4 seq 5 deny 0.0.0.0/0 le 32
!
ipv6 route 2001:DB8:0:DEAD:BEEF::1/128 Null0
!
ipv6 prefix-list cymru-out-v6 seq 5 deny ::/0 le 128
!
route-map CYMRUBOGONS-V6 permit 10
description IPv6 Filter bogons learned from cymru.com bogon route-servers
match community 100
set ipv6 next-hop 2001:DB8:0:DEAD:BEEF::1
!
route-map CYMRUBOGONS-V4 permit 10
description IPv4 Filter bogons learned from cymru.com bogon route-servers
match community 100
set ip next-hop 192.0.2.1

Note: You can receive both IPv4 and IPv6 fullbogons over IPv6 transport. If you only requested one set of fullbogons, simply remove all references to the other set from the example above.


Juniper JunOS Fullbogons IPv4 and IPv6

Thanks to David Hill at Hostcentral for the below example!

/*
* Define BGP peer group
*/
delete protocols bgp group cymru-bogons
set protocols bgp group cymru-bogons type external
set protocols bgp group cymru-bogons description "cymru fullbogon bgp feed (ipv4 + 6)"
set protocols bgp group cymru-bogons multihop ttl 255
set protocols bgp group cymru-bogons import cymru-bogons-in
/*
* Define MD5 password in quotes
*/
set protocols bgp group cymru-bogons authentication-key "<YOUR PASSWORD>"
set protocols bgp group cymru-bogons export deny-all
set protocols bgp group cymru-bogons peer-as 65332
/*
* Replace values below as appropriate
*/
set protocols bgp group cymru-bogons neighbor A.B.C.D local-address <YOUR IP>
set protocols bgp group cymru-bogons neighbor A.B.C.D family inet unicast
set protocols bgp group cymru-bogons neighbor A.B.C.D family inet6 unicast
set protocols bgp group cymru-bogons neighbor E.F.G.H local-address <YOUR IP>
set protocols bgp group cymru-bogons neighbor E.F.G.H family inet unicast
set protocols bgp group cymru-bogons neighbor E.F.G.H family inet6 unicast
/*
* Define CYMRU import policy
*/
delete policy-options policy-statement cymru-bogons-in
set policy-options policy-statement cymru-bogons-in term 1 from family inet
set policy-options policy-statement cymru-bogons-in term 1 from community comm-cymru-bogon
set policy-options policy-statement cymru-bogons-in term 1 then community add no-export
set policy-options policy-statement cymru-bogons-in term 1 then next-hop discard
set policy-options policy-statement cymru-bogons-in term 1 then accept
set policy-options policy-statement cymru-bogons-in term 2 from family inet6
set policy-options policy-statement cymru-bogons-in term 2 from community comm-cymru-bogon
set policy-options policy-statement cymru-bogons-in term 2 then community add no-export
set policy-options policy-statement cymru-bogons-in term 2 then next-hop discard
set policy-options policy-statement cymru-bogons-in term 2 then accept
set policy-options policy-statement cymru-bogons-in then reject
/*
* Define deny-all export policy
*/
delete policy-options policy-statement deny-all
set policy-options policy-statement deny-all then reject
/*
* Define CYMRU Bogon community
*/
delete policy-options community comm-cymru-bogon
set policy-options community comm-cymru-bogon members no-export
set policy-options community comm-cymru-bogon members 65332:888
/*
* Define internal no-export community
*/
delete policy-options community comm-no-export
set policy-options community comm-no-export members no-export

Quagga fullbogons IPv6

The following example will import and null-route the IPv6 fullbogons, peered over IPv4 transit, using the Quagga software router package.

router bgp <your asn>
 no bgp default ipv4-unicast
 timers bgp 3600 10800
 neighbor cymru-bogon peer-group
 neighbor cymru-bogon remote-as 65332
 neighbor cymru-bogon ebgp-multihop 255
 neighbor cymru-bogon activate
 neighbor cymru-bogon soft-reconfiguration inbound
 neighbor cymru-bogon prefix-list cymru-out out
 neighbor cymru-bogon route-map CYMRUBOGONS in
 neighbor xx.xx.xx.xx peer-group cymru-bogon
!
 address-family ipv6
 neighbor cymru-bogon activate
 neighbor cymru-bogon prefix-list v6cymru-out out
 neighbor xx.xx.xx.xx peer-group cymru-bogon
 neighbor xx.xx.xx.xx soft-reconfiguration inbound
 exit-address-family
!
ip prefix-list cymru-except description Don't want to import these networks
ip prefix-list cymru-except seq 20 permit 0.0.0.0/0 ge 8
!
ipv6 prefix-list cymru-out seq 5 deny ::/0 le 128
ipv6 prefix-list v6cymru-out seq 5 deny any
!
ip community-list 10 permit 65332:888
!
route-map CYMRUBOGONS permit 10
 description Filter bogons learned from cymru.com bogon route-servers
 match community 10
 match ip address prefix-list cymru-except
 set ip next-hop 192.0.2.1
 set ipv6 next-hop global 2001:DB8:0:DEAD:BEEF::1

If you wish to receive both IPv4 and IPv6 fullbogons over the same peering session, you will typically need to replicate the statements in the above example's "address-family ipv6" section to an "address-family ipv4" section, with an appropriate change to the prefix-list applied to the peer-group.


Mikrotik RouterOS fullbogons

# Full Bogons Mikrotik Template
# Work on RouterOS 4.X
# 2010-11-01 by Ricardo Ozelo

# BGP instance setup

/routing bgp instance set default as=<YOUR_ASN> \
 router-id=<WAN_IP_ADDRESS>

# ROUTING FILTERS - Install these routes as blackholes,
# does NOT receive or announce anything else

/routing filter add action=accept bgp-communities=65332:888 \
 chain=cymru-in comment="" disabled=no invert-match=no \
 set-type=blackhole
/routing filter add action=discard chain=cymru-in comment="" \
 disabled=no invert-match=no
/routing filter add action=discard chain=cymru-out comment="" \
 disabled=no invert-match=no

# Peering #1

/routing bgp peer add address-families=ip,ipv6 disabled=no in-filter=cymru-in \
 instance=default multihop=yes name=FULLBOGONS-CYMRU-1 out-filter=cymru-out \
 remote-address=<CYMRU_IP_ADDRESS_1> remote-as=65332 tcp-md5-key=<CYMRU_MD5_PASSWORD>

# Peering #2

/routing bgp peer add address-families=ip,ipv6 disabled=no in-filter=cymru-in \
 instance=default multihop=yes name=FULLBOGONS-CYMRU-2 out-filter=cymru-out \
 remote-address=<CYMRU_IP_ADDRESS_2> remote-as=65332 tcp-md5-key=<CYMRU_MD5_PASSWORD>

BIRD Internet Routing Daemon fullbogons

Courtesy of Miłosz Oller.

PLEASE NOTE: As of version 1.3.11 Bird does not allow you to run IPv4 and IPv6 simultaneously. Therefore you should use EITHER bgp_cymru_v4_1 and bgp_cymru_v4_2 OR bgp_cymru_v6_1 and bgp_cymru_v6_2 in your config. x For dual-stack systems can run two instances of Bird with one peering over IPv4 and the other over IPv6.

filter cymru_bogons_import
{
    bgp_community.add((65332,888));
    dest = RTD_BLACKHOLE;
    accept;
}

filter cymru_bogons_export
{
    reject;
}

protocol bgp bgp_cymru_v4_1 {
    description "Cymru Bogons RS1";
    import filter cymru_bogons_import;
    export filter cymru_bogons_export;
    multihop 255;
    password "pass_here";
    local as my_asn;
    neighbor 38.229.66.20 as 65332;
    source address IPv4_here;
}

protocol bgp bgp_cymru_v4_2 {
    description "Cymru Bogons RS2";
    import filter cymru_bogons_import;
    export filter cymru_bogons_export;
    multihop 255;
    password "pass_here";
    local as my_asn;
    neighbor 193.231.140.82 as 65332;
    source address IPv4_here;
}

protocol bgp bgp_cymru_v6_1 {
    description "Cymru Bogons RS1 v6";
    import filter cymru_bogons_import;
    export filter cymru_bogons_export;
    multihop 255;
    password "pass_here";
    local as my_asn;
    neighbor 2620:0:6B0::26E5:4207 as 65332;
    source address IPv6_here;
}

protocol bgp bgp_cymru_v6_2 {
    description "Cymru Bogons RS2 v6";
    import filter cymru_bogons_import;
    export filter cymru_bogons_export;
    multihop 255;
    password "pass_here";
    local as my_asn;
    neighbor 2001:B30:1000:19::2 as 65332;
    source address IPv6_here;
}


Cisco ASA Firewalls fullbogons

Courtesy of Abe Marji.

PLEASE NOTE: ASA Firewalls began supporting BGP as of version 9.2.


!
! ASA 55xx - IOS Version 9.2.1
!
conf terminal
!
! Prefix list used to BLOCK any route annoucement to Cymru Service
prefix-list CYMRU-OUT-V4 seq 1000 deny 0.0.0.0/0 le 32
!
! We like bgp new-format
bgp-community new-format

! create a new community list, 100, to validate Cymru ASN:Community 
community-list expanded 100 permit 65332:888
!
!
! Route map is used to set the next hop for any route being learned with a Cyrmu community tag to specific route which points to null0
route-map CYMRU-IN-V4 permit 10
 match community 100
 set ip next-hop 192.0.2.1
!

! Basic BGP Routing configuration
router bgp [your_ASN_here]
 bgp log-neighbor-changes
 timers bgp 15 45 0
 address-family ipv4 unicast
  neighbor [Cymru bgp peer1 IP] remote-as [Cymru ASN]
  neighbor [Cymru bgp peer1 IP] description Cymru Peer 1
  neighbor [Cymru bgp peer1 IP] ebgp-multihop 255
  neighbor [Cymru bgp peer1 IP] password [password]
  neighbor [Cymru bgp peer1 IP] version 4
  neighbor [Cymru bgp peer1 IP] activate
  neighbor [Cymru bgp peer1 IP] send-community
  neighbor [Cymru bgp peer1 IP] prefix-list CYMRU-OUT-V4 out
  neighbor [Cymru bgp peer1 IP] route-map CYMRU-IN-V4 in
  neighbor [Cymru bgp peer2 IP] remote-as [Cymru ASN]
  neighbor [Cymru bgp peer2 IP] description Cymru Peer 2
  neighbor [Cymru bgp peer2 IP] ebgp-multihop 255
  neighbor [Cymru bgp peer2 IP] password [password]
  neighbor [Cymru bgp peer2 IP] version 4
  neighbor [Cymru bgp peer2 IP] activate
  neighbor [Cymru bgp peer2 IP] send-community
  neighbor [Cymru bgp peer2 IP] prefix-list CYMRU-OUT-V4 out
  neighbor [Cymru bgp peer2 IP] route-map CYMRU-IN-V4 in
  maximum-paths 2
  default-information originate
  no auto-summary
  no synchronization
 exit-address-family
!
! Create a dummy route pointing to Null0
route Null0 192.0.2.1 255.255.255.255 1

! Route Cymru BGP Peer IP's 
route outside [Cymru bgp peer1 IP] 255.255.255.255 [Your Next Hop] 1
route outside [Cymru bgp peer2 IP] 255.255.255.255 [Your Next Hop] 1


Nokia SR OS IPv4 and IPv6

Courtesy of Greg Hankins

# TiMOS-B-13.0.R6 both/hops ALCATEL SR 7750 Copyright (c) 2000-2015 Alcatel-
Lucent.
# All rights reserved. All use subject to applicable license agreements.
# Built on Wed Nov 18 15:23:15 PST 2015 by builder in /rel13.0/b1/R6/panos/main

# Generated WED FEB 24 02:30:29 2016 UTC

exit all
configure
#--------------------------------------------------
echo "Router (Network Side) Configuration"
#--------------------------------------------------
    router Base
        autonomous-system 
        router-id 
#--------------------------------------------------
echo "Static Route Configuration"
#--------------------------------------------------
        static-route X.X.X.X black-hole
#--------------------------------------------------
echo "Static IPv6 Route Configuration"
#--------------------------------------------------
        static-route  X:X:X:X    black-hole
    exit
#--------------------------------------------------
echo "Router (Service Side) Configuration"
#--------------------------------------------------
    router Base
#--------------------------------------------------
echo "Policy Configuration"
#--------------------------------------------------
        policy-options
            begin
            policy-statement "DENY_ALL"
                default-action reject
            exit
            policy-statement "RP_IMPORT_BOGONS"
                entry 10
                    from
                        protocol bgp
                        family ipv4
                    exit
                    action accept
                        next-hop X.X.X.X
                    exit
                exit
                entry 20
                    from
                        protocol bgp
                        family ipv6
                    exit
                    action accept
                        next-hop X:X:X:X
                    exit
                exit
                default-action reject
            exit
            commit
        exit
#--------------------------------------------------
echo "BGP Configuration"
#--------------------------------------------------
        bgp
            group "BOGONS"
                description "Team Cymru Bogons"
                multihop 255
                import "RP_IMPORT_BOGONS"
                export "DENY_ALL"
                neighbor X.X.X.X
                    description "Team Cymru Bogons IPv4 Session #1"
                    family ipv4
                    authentication-key 
                    prefix-limit ipv4 10000
                    peer-as 65332
                exit
                neighbor X.X.X.X
                    description "Team Cymru Bogons IPv4 Session #2"
                    family ipv4
                    authentication-key 
                    prefix-limit ipv4 10000
                    peer-as 65332
                exit
                neighbor X:X:X:X
                    description "Team Cymru Bogons IPv6 Session #1"
                    family ipv6
                    authentication-key 
                    prefix-limit ipv6 100000
                    peer-as 65332
                exit
                neighbor X:X:X:X
                    description "Team Cymru Bogons IPv6 Session #2"
                    family ipv6
                    authentication-key 
                    prefix-limit ipv6 100000
                    peer-as 65332
                exit
            exit
            no shutdown
        exit
    exit
exit all